|
|
| |
|
 |
ISaGRAF Embedded Controller |
| |
|
|
| |
|
|
DATA SHEET
|
 |
data%20sheet.htm |
|
|
|
|
Manual File
|
|
getting_started_manual.htm |
|
|
|
|
Driver File
|
|
isagraf-link.htm |
|
|
|
|
|
|
 |
The i-7188XG series is a palm-size ISaGRAF PAC and includes ISaGRAF SoftLogic. It has 2 serial ports (COM1:RS232/RS485 & COM2:RS485). The user can choose I/O expansion board, X-board, to expand the I/Os or memories of i-7188XG.
The i-7188XG supports Modbus serial protocol, Modbus master protocol, Fbus:RS485, remote I/O, SMS: Short Message Service, modem link, MMICON / LCD and user defined protocol. |
|
 |
 Creating a modbus Link with the i-7188XG |
|
The i-7188XG controller can be a Modbus "Slave" and/or a Modbus "Master" controller depending on the application. As a Modbus slave, you can use COM1 (RS232/RS485) of the i-7188XG controller to link to PCs or other HMI products. As a Modbus master, you can use COM2 (RS485) to talk to other PLCs or devices which support Modbus protocol. | |
| |
 Modbus RTU/TCP Slave Ports ( How to use ? ) |
| Modbus RTU (RS232/485/422): max. 2 Modbus RTU slave ports |
| Modbus TCP/IP: max. 4 Modbus TCP slave connections |
| |
 |
| |
| Modbus RTU Master Ports ( How to use ? ) |
| Modbus RTU (RS232/485/422): max. 2 Modbus RTU master ports |
| |
 |
| |
|
|
|
| |
| Expansion boards / Remote IO modules |
| |
|
|
| |
| I/O Expansion Boards |
The i-7188XG has an I/O expansion bus which can plug an expansion I/O board. Available I/O boards are as X107, X202, X203, X303, X304, X305, X503, X504, X505, X506, X507, X508, X509, X510 and more. | |
| |
| Linking the i-7000 & i-87xx module for remote I/O |
The i-7188XG controller can use its COM2 (RS485) port to link to ICP DAS's "i-7000" & “i-87xx” series ( Note1) of remote I/O modules. This configuration can be very useful in applications that require distributed remote I/O throughout the system.
How to use ? | |
| |
|
|
|
| Data Exchange via Fbus or Ebus |
| |
| Fbus ( RS-485 network ) |
|
Each i-7188XG can use its other RS-485 port (COM2) to talk to each other via the Fbus communication mechanism. Fbus can be used to broadcast data to each controller or each controller can request to send or receive data from any other controller on the same Fbus network. | |
| |
 |
| |
|
|
|
| |
| Data log |
| |
Data, date & time can be stored at X607 / X608, and then PC can load these data via RS232/RS485. How to use ? | |
| |
| |
 |
| |
|
|
|
| |
| Remotely Download Program: Modem_Link |
|
The Modem_Link is an software designed by ICP DAS, which need to be installed into the ISaGRAF software in your PC. The Modem_Link provide you an easy way to remotely download your ISaGRAF program to the i-7188XG though COM4 of X504 via a general modem. And also you can monitor every I/O, data and if the program allows, you can control it via the Modem. | |
| |
|
|
|
| |
| PWM : Pulse Width Modulation output |
Parallel D/O boards can do PWM output. Up to 8 channels for one controller. 500 Hz max. For Off=1ms & On=1ms. Available output square curve: Off = 1 to 32767 ms, On = 1 to 32767 ms. How to use ? | |
| |
|
|
|
| |
| Parallel D/I counters: |
Parallel D/I board at slot 0 can accept counter input up to 500Hz with minimum pulse width > 1ms. Up to 8 channel for one controller. Counter value: 32 bit. How to use ? | |
| |
|
|
|
| |
| SMS: Short Message Service |
The i-8417/8817/8437/8837, μPAC-7186EG, i-7188EG, i-7188XG & Wincon-8X47 controllers can integrate with a GSM Modem to support SMS: Short Message Service. This allows user to request information or control something from his own cellular phone to the ISaGRAF controller. Beside, the controller can also send information and alarms to user's cellular phone. How to use ? | |
| |
 |
| | |
|
 |
| Power supply |
|
| Power requirements |
10 to 30VDC (unregulated) , i-7188XG:2W, i-7188XGD:3W |
| Protection |
Built-in power protection & network protection circuit |
| General environment |
|
| temperature |
Operating: -25°C to +75°C ( -13° F to +167° F) ,
Storage : -30°C to +85°C ( -40° F to +176° F) |
| Humidity |
5 to 95% (non-condensed) |
| System |
|
| CPU |
80188 40MHz, or compatible |
| Watchdog timer |
Yes, default 0.8 second |
| Real time clock |
Gives hour, minute, sec, date of week, date of month, month & year (1980 to 2079) |
| SRAM |
512K bytes |
| FLASH Memory |
512K bytes, Erase unit is 64K bytes, 100,000 erase/write cycles |
| NVSRAM |
31 bytes, battery backup, data valid up to 10 years |
| EEPROM |
2048 bytes, retention > 100 years. 1,000,000 erase/write cycles |
| Display for i-7188EGD |
Five 7-Seg. Led on the front. lt can display message & value. |
| Expansion I/O bus |
One optional Xxxx series I/O board can be plugged inside the i-7188EG / EGD. |
| NET ID |
Set by software, 1 to 255 |
| Serial ports |
|
| COM1 |
Can be used as RS232 or RS485, Speed: 115200 bps max. Program downloads port.
RS232 TXD,RXD,RTS,CTS,GND RS485: D+, D-, self-tuner inside |
| COM2 |
RS485: D+, D-, 115200 bps max. Self-tuner ASIC inside, Program downloads port. |
| Development software |
|
| ISaGRAF Version 3 |
IEC61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC |
| Max. code size |
i-7188XG/XGD accepts max.64K byte ISaGRAF code size (Appli.x8m must < 64K) |
| PWM output |
|
| Pulse Width Modulation output |
All Xxxx series D/O boards support PWM output. 8 channels max. for one controller.
500Hz max. for Off=1 & On=1 ms
Output square curve: Off: 1 to 32767 ms, On: 1 to 32767 ms |
| Counters |
|
| Parallel D/I counter |
All Xxxx series D/I boards support D/I counter.
8 ch. max. for one controller. Counter value: 32 bit
500Hz max. Min. pulse width > 1ms |
| Remote D/I counter |
All remote i-7000 & i-87K D/I modules support counters. 100Hz max. value: 0 to 65535 |
| Remote High speed counter |
Optional i-87082:100kHz max. ,32 bit |
| Protocols |
|
| Modbus serial protocol |
Up to 2 COM ports (COM1 and COM3-in-X-board) can support Modbus RTU slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels. |
| Modbus master protocol |
Up to 2 COM ports (COM1 , COM2 and COM3-in-X-board) support Modbus RTU/ASCII master protocol to connect to other Modbus slave I/O devices |
| Remote I/O |
One of COM2 (or COM3:RS485 if found) supports I-7000 I/O modules & (I-87K base or RU-87P4/8 + I-87K serial I/O boards) as remote I/O. Max. 64 I/O modules for one controller |
| Fbus |
Built in COM2 port to exchange data between ICP DAS's ISaGRAF controllers. |
| SMS: Short Message Service |
One of COM1, (COM3:RS232 or COM4:RS232 if found) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone. Optional GSM modems: M1206 or GM29 (GSM 900/1800) |
| User defined protocol |
User can write his own protocol applied at COM1, COM2 & (COM3 to COM8 if found) by serial communication function blocks. |
| Modem Link |
Supports PC remotely download & monitor the controller through COM4 of X504. |
| MMICON / LCD |
One of (COM3:RS232 if found) supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float. |
| Battery backup SRAM |
|
|
i-7188XG / 7188XGD can support up to 1024 retain variables with an X607 / X608 plug in the only expansion I/O slot. Data can be stored in X607/X608, and then PC can load these data via COM1 or Ethernet. PC can also download pre-defined data to the X607/X608.Optional: X607: 128k bytes, X608: 512k bytes | |
|
 |
| Ethernet ISaGRAF μPAC |
i-7188XG CR |
ISaGRAF Programmable Automation Controller (RoHS)
80188-40MHz |
| i-7186XGD CR |
ISaGRAF PAC with 5-digit 7-segment display (RoHS)
80188-40MHz |
| Development Software |
ISaGRAF-256-E
ISaGRAF-256-C |
ISaGRAF Workbench Software Ver.3 (256 I/O Tags)
with application book (E: English book; C: Chinese book) |
ISaGRAF-32-E
ISaGRAF-32-C |
ISaGRAF Workbench Software Ver.3 (32 I/O Tags) ReadMe
with application book (E: English book; C: Chinese book)
Note: ISaGRAF-32 can not upgrade to become ISaGRAF-256 |
| Application Book |
ISaGRAF Book-E |
ISaGRAF Application Book (English) |
| ISaGRAF Book-C |
ISaGRAF Application Book (Traditional Chinese) |
| X-Board SRAM |
X607 |
128K bytes battery backup SRAM |
|
|
|
|
|
|
번호 |
분 류 |
제 품 명 |
화일명 |
다운로드 |
COUNT |
|
|
|
|
|
|
|
|
|
|
